Having a phone that won’t charge or turn on is one thing, but knowing that there’s a chip inside that’s damaged and preventing it from turning on is an entirely different frustration. But, knowing is half the battle, both when it comes to the cables being used and the steps needed to fix it. Did you ever suffer from an iPhone that wouldn’t turn on, or charge over 1%?
Read MoreApple specifies that their batteries work best at a range of 0 degrees Celsius to 35 degrees Celsius. While we almost never reach the upper range in Canada, temperatures below freezing are typical for the winer months.
Because the battery meter is calibrated assuming warmer temperatures, the reduced capacity in the cold can cause the reading to be unreliable. This is one of the reasons your phone may die while still showing 30%.
Read MoreRead MoreContrary to popular belief, sim cards contain very little [if any] user saved data. The main purpose of a sim card to to authenticate your device onto the network of choice and facilitate wireless transfers to and from your device to the wireless towers in the form of data and/or voice calls.
This is a typical issue faced with mobile devices that have lithium ion polymer batteries.
Every iPhone device has a Li-ion battery inside and eventually it will need to be replaced. Typically most batteries are only rated at about 600-700 charge cycles, after or even before this time the battery life will be much shorter then it used to be. It may also get a bit warm as the cells inside the battery wear out.
Read MoreThe top 2 screws (shown in orange and yellow) screw into the frame and/or stand-off screws. The 3 screws in the bottom triangle are sitting atop the motherboard millimeters above very tiny traces that can be breached if a longer screw is used, hence the name "long screw damage". This is often caused by in-experienced technicians and/or Do-It-Yourselfers who failed to accurately keep track of the screws.
When this type of damage is done, the only method to repair the phone is micro soldering with a microscope. It is very significant and often times can completely ruin the phone. The symptoms of this damage is often: blue screen on start up, red screen on boot, no backlight, no image on boot, phone still vibrates but no image on screen.
Read MoreWires Computing offers many repairs services such as Samsung galaxy repairs
Samsung Galaxy Series Cracked Screen Repairs
Samsung Galaxy Series Charger Port Repairs
Samsung Galaxy Series Back Cover Replacements
Samsung Galaxy Series Camera Repairs
Samsung Galaxy Series Battery Replacements
Samsung Galaxy Series Water Damage Repairs
Often times the charger ports can be re-soldered onto the circuit board after disassembly. This type of repair requires micro soldering
If you need this type of repair for your device give us a call and we can take care of it for you. Often we have most common ports and parts in stock and repairs are done within 1-3 business days. If you are not located within local access to our repair shop you may also send in your device for repair.
Read MoreRead More…First it came in as a broken camera. Which is typical for a phantom 3 after a crash, but after replacing the camera it kept beeping as if it were doing a firmware update. During the phantom 3 power on it would continuously beep beep beep. So later after opening it I found a big issue which was the flight recording and "main board" was broken from all of its solder joints.
Read More…The iPhone 6 that we had showed signs of life but no display. After replacing the screen with a new one, it still showed no signs of an image. When inspecting the screen in front of a flashlight, a faint image was visible. This confirmed that the phone was on and in fact worked, but had a blown back light. For this type of repair it would require micro soldering. After checking the filters on the motherboard we found them to have continuity and functioned within specifications. At this point in the back light circuit we still had a back light display BGA IC (ball grid array integrated circuit) as well as a coil and a diode. After checking the coil, which was also found to be within specifications, we then looked to the diode. Below is the picture of the diode under the cpu heatsink.
Wires Computing offers computer repair services in our Burlington Vermont repair shop 05401 area
We can fix both Windows and Mac computers, we love them both!
Any computer issue is no problem for us, computer doesn't start, flashing question mark folder? 3 Beeps on start-up? We have the solutions for every computer issue!
Read MoreIf you have an iPhone that has no backlight this can often be the result of an improper screen replacement or previous work done on the iPhone motherboard can cause the back light to suddenly go out. Liquid damage can also cause no back lights on an iPhone.
If you are local to the Burlington repair shop you can simply stop by during our business hours and we will get the repair started. If you plan to send in your iPhone to get repair that’s great! The process to send in your iPhone with no back light is simple, start a ticket on our Send-In-Repair Page we will update you once the device is received, and then once again when the device is mailed back to you with a tracking number. This service typically takes 1-2 business days either by send in or local repairs. keep in mind this does not include return shipping transit times. We also offer expedited repairs if needed.
Read MoreDue to the iPhone 6S having a 3D touch sensor chip built into the screen assembly the prices for the parts are a bit higher then others, but are still worth getting fixed. Currently an iPhone 6S is worth about $600-$800 and at Wires Computing you can have your screen repaired for as little as $89 (as of this post) Stop into our repair shop to get your iPhone 6s repaired today!We also offer iphone charger port repairs, iphone button repairs, iphone camera repairs, battery replacements and many more!
Read MoreGot an iPad with a cracked screen? Wires Computing can fix that for you!
iPad screen repairs generally take 1-2 business days for completion due to the type of repair that is needed on these devices.
We repair all iPad screens from iPad 2, iPad 3, iPad 4, iPad Air 1/2, iPad Mini, iPad Pro
We use original parts unlike the cheap ipad repairs you find online. The reason our repairs take 1-2 days is due to the premium quality adhesive required to adhere the glass digitzer back to the frame so you dont have lifting problems after the repair. The curing time is required for a quality repair on the ipad.
Read MoreWires Computing offers 3D Printing Services in Burlington, Vt
3D Printing has a variety of uses for personal and work, we are able to print almost anything for your needs with our PLA and ABS filament. Currently we are unable to design parts and/or models, only print them.
If you would like an object printed out in 3D check out the database of projects at www.thingiverse.com
Replacement Parts
Prototyping
Designing
Testing
Toys
Tools
Please use the module below to start your 3D Print.
Please note that we only accept files in .STL format for 3D printing
Read MoreWe repair everything from:
U2 tristar IC replacement
iPhone backlight repair
iPhone not charging repair
iPhone no touch repair caused by bad touch ic
iPhone fpc repair
iPhone long screw damage
iPhone not powering on
iPhone liquid damage repair
For more info please see our full micro soldering page
Read MoreHave you accidentally upgraded to windows 10 and want to go back to windows 7 or windows 8?
We can help!
Windows 10 has used some sneaky methods to upgrade your computer without authorization, we can rollback your computer to any version of windows.
If you are currently on windows 7,8,8.1 and want to ensure you are not accidentally upgraded then we can also make sure that your computer will not be converted to the new operating system unknowingly.
Give us a call today to fix your windows woes!
Read MoreThe process to unlock your iphone to work with any carrier is straight forward, bring your device into our shop so we can get the IMEI (International Mobile Equipment Idenity) number which we will then run through our servers and process the network unlock within 1-6hrs.
After the server has run the network unlock we will then reboot the phone and the phone will then be sim unlocked to work with many other network carriers*
iPhone unlocks do not use a subsidy code and thus are processed on the server side.
We unlock all iPhones from iPhone 6/7/8/X
Read MoreThis repair takes about 1 hour to complete and micro soldering is required to attach the new port into the motherboard. Some phones have soldered on ports and some have daughter boards that can be removed separately and replaced.
Read MoreDrone Parts
We currently stock many of the following:
Electronic Speed Controllers (ESC's)
Stop by today at Wires Computing and BTV Drones to stock up on replacement parts for your fpv drones!
BTV Drones is located at 383 College St. Burlington, VT 05401
Get your FPV fix at www.btvdrones.com
Read MoreWires Computing is pleased to announce a parnership with Gillware Data Recovery.
If you are in need of data recovery services be sure to give us a call first at (802)448-0403
If we are unable to sucessfully recover your data, we can facilitate the process of getting your data safely extracted with trained professionals at Gillware Data Recovery.
Read More
